V-Tec C5-AT25/D4 Manual de usuario descargar pdf (Pagina 3)

User manual Rev. 1.1 — 15 October 2014 3 of 24

NXP Semiconductors

UM10812

SSL5301DB1233 230 V 36 W LED driver demo board

1. Introduction

This user manual describes the operation of the SSL5301DB1233 36 W isolated flyback

converter driver demo board featuring the SSL5301T. The demo board is designed for

230 V mains phase-cut dimmable applications.

The SSL5301DB1233 demo board is designed for 48 V at a 700 mA LED string load.

The single layer PCB with dimensions 120 mm  50 mm  30 mm is intended for fixtures

used in SSL applications.

The SSL5301DB1233 demo board provides a simple and effective solution for a 230 V

mains application. It includes a high Power Factor (PF), high efficiency, and a low Total

Harmonic Distortion (THD).

The topology uses a single stage flyback converter without Power Factor Correction

(PFC) pre-stage.

1.1 Features

• SSL5301T LED driver

• Single stage flyback converter without PFC pre-stage

• 230 V mains phase-cut dimmable for Leading-Edge (LE), Trailing-Edge (TE) and

smart dimmers

• Open LED string protection

• Short circuit LED string protection

• OverCurrent Protection (OCP)

• OverTemperature Protection (OTP)

• Power factor > 0.95

• THD < 10 %

• Efficiency > 90 %

• Compliant with IEC61000-3-2 harmonics standard

• Compliant with EN55015 EMI standard

Figure 2

shows the assembled top and bottom board views.

WARNING

Lethal voltage and fire ignition hazard

The non-insulated high voltages that are present when operating this product, constitute a

risk of electric shock, personal injury, death and/or ignition of fire.

This product is intended for evaluation purposes only. It shall be operated in a designated test

area by personnel qualified according to local requirements and labor laws to work with

non-insulated mains voltages and high-voltage circuits. This product shall never be operated

unattended.

1 2 3 4 5 6 7 8 ... 23 24

Sin comentarios

V-Tec C5-AT25/D4 Manual de usuario Pagina 3