V-Tec 2-wire Manual de usuario descargar pdf (Pagina 16)

Hi-cam Switchover-point Adjustment (while vehicle is not moving)

Example: Hi-cam switchover point to

5000 RPM.

Switch to VTC Mode.1.

After a short hold on the MODE,

you will hear a "beep" sound, and

will see the MODE switch change

to red. Your are now in "Setting

Mode."

Use the UP and DOWN buttons to

set the hi-cam switchover point --

keeping in mind that the number

to the left is the RPM in 100 RPM

incremetns.

Buzzer (RPM alarm) Point Setting

Example: RPM alarm point to 7800

RPM

After setting the hi-cam

switchover point, a short hold on

the MODE switch will change the

SFC-VTEC to "Buzzer Mode"

(the "H" on the right-hand side of

the center display becomes a "b")

Please apply the same instructions

as the hi-cam switchover

instructions.

If there is no input for 5 seconds,

the SFC-VTEC will automatically

return to "Realtime Mode"

After a short hold on the MODE

button, you will hear a electronic

SFC-VTEC VTEC-mode (hi-cam switchover)

http://asia.vtec.net/beystock/field/sfc-vtec/x01_sfcv006.html (3 von 4) [06.07.2000 22:47:49]

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 34 35

Sin comentarios

V-Tec 2-wire Manual de usuario Pagina 16