V-Tec 2-wire Especificaciones descargar pdf (Pagina 19)

Camera Auto Switching

When multi Door Stations or CCTV cameras are installed in the system, Monitor can display the video one after

another. The Monitoring time for each Station or Camera must be set by the DT-CONFIG software manually to enable the

Auto Switching function(DT-CONFIG-- >Parameter-- >Camera Switching Time). Also, you can touch the icon on the

screen to monitor a specific camera only.

Color Picture Memory

Total 128 pcs picture can be stored in the Monitor. User can both record the picture manually and set the Monitor to

automatically record pictures.

•

Manually record: when the Monitor is in monitoring or talking state(the screen is turned on), press the record

icon on the touch screen or press a record button, the current picture which show on the screen will be saved into

the built-in flash memory of the Monitor.

• Automatically record: A picture will be saved after 2 seconds the visitor pressed the call button on the Door

Station. To enable the auto record function, go to the Main-- >Setup menu, and turn on the 'Auto Record' item.

• Pictures can be deleted manually using the touch screen.

• When the memory is full(about 128 pcs), the oldest picture will be replaced by the latest saved picture.

SD Card

Built-in SD card reader, maximum 2 GB supported.

•

Video and audio(DVR) record: Automatically or manually record can be set in need, total 4.5 hours recording

time; play back on the Monitor or on the PC.

• Digital Photo frame: play back the pictures (JPEG format only) on the SD card using a slide show as photo frame.

• MP3 background music: The MP3 files on the SD card can be played as a background music.

DT - System - Technical Guide 16

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 51 52

Sin comentarios

V-Tec 2-wire Especificaciones Pagina 19