
BASIC SYSTEM DIAGRAMS
2
−−−−
sec.1e
DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
DOOR PHONE SYSTEMS
FUNCTION
The system can be used to connect the video door unit to various
video door phones fi tted in apartments.
When a visitor presses a button on the panel, a two-tone electronic call
signal is sent to the corresponding video door phone speaker and the
image appears on the screen a few seconds later.
At this point, the user can see the visitor and reply by picking up the
handset.
All video door phones are normally deactivated (no sound is heard
when the handset is picked up); only the video door phone called from
the door can start the conversation. No other users can cut into the
call.
The voice circuit of the called video door phone remains activate until
the following call is made from the panel to another device.
The door opening function is connected to conversation privacy; this
means that a user must be called to be able to open the electrical
lock.
EQUIPMENT
The following devices are needed for the system illustrated in diagram
SV102-3147B:
“5-WIRE” VIDEO DOOR PHONE KIT DIAGRAMS
N. 1 One-family kit (1 button)
with Atlantico video door phone Ref. 1702/601
consisting of:
• Sinthesi camera with integrated door unit and 1 calling
button Ref. 1745/21
• 1 Atlantico video door phone Ref. 1702/1 with bracket
Ref. 1202/955
• Flush-mounting box for 2 modules Ref. 1145/52
• Module holder with frame for 2 modules Ref. 1145/62
• Power unit 230Vac-38VA, 10 DIN modules Ref. 789/5B
or
N. 1 One-family kit (1 button)
with Artico video door phone Ref. 1705/601
consisting of:
• Sinthesi camera with integrated door unit and 1 calling
button Ref. 1745/21
• 1 Artico video door phoneRef. 1705/1 with bracket
Ref. 1705/955
• Flush-mounting box for 2 modules Ref. 1145/52
• Module holder with frame for 2 modules Ref. 1145/62
• Power unit 230Vac-38VA, 10 DIN modules Ref. 789/5B
or
N. 1 Two-family kit (2 buttons)
with Atlantico video door phone Ref. 1702/602
consisting of:
• Sinthesi camera with integrated door unit and 2 calling
buttons Ref. 1745/22
• 2 Atlantico video door phones Ref. 1702/1 with bracket
Ref. 1202/955
• Flush-mounting box for 2 modules Ref. 1145/52
• Module holder with frame for 2 modules Ref. 1145/62
• Power unit 230Vac-38VA, 10 DIN modules Ref. 789/5B
or
N. 1 Two-family kit (2 buttons)
with Artico video door phone Ref. 1705/602
consisting of:
• Sinthesi camera with integrated door unit and 2 calling
buttons Ref. 1745/22
• 2 Artico video door phones Ref. 1705/1 with bracket
Ref. 1705/955
• Flush-mounting box for 2 modules Ref. 1145/52
• Module holder with frame for 2 modules Ref. 1145/62
• Power unit 230Vac-38VA, 10 DIN modules Ref. 789/5B
DIAGRAM NOTES
(see section 1)
V5.001
V5.006
(*) For two-family kits only
5
7
6
10
2
TC
(*)
CONNECTION OF 2 VIDEO DOOR PHONES TO 1 VIDEO DOOR UNIT
Comentarios a estos manuales