
BASIC SYSTEM DIAGRAMS
8
−−−−
sec.1e
DOOR PHONE - VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
DOOR PHONE SYSTEMS
FUNCTION
This system allows the connection of a column of video door phones
to 2 video outdoor stations with automatic switching.
When a visitor presses a call button on one of the two push button
panels, in the called apartment the bitonal electronic call is sent to the
corresponding video door phone loudspeaker and the image appears
on the screen after about 8 seconds.
During this phase, the relay box automatically inserts the relative
loudspeaking unit and TV camera, excluding the other video outdoor
station from the service.
At this point, the user sees the visitor and may respond, if desired,
lifting the handset. At the end of the call, only the electric lock of the
entrance concerned is activated pressing the key .
If, during a conversation, a call is made from the other push button
panel towards another video door phone, the fi rst will automatically
switch off and the last video door phone called will be activated. It
is not possible therefore to communicate with the 2 video outdoor
stations at the same time in that they operate alternatively and are
mutually exclusive.
EQUIPMENT
The following devices are needed for the system illustrated in diagram
SV102-2902G:
VIDEO DOOR PHONE REFERENCES
Atlantico model
N. X Video door phone Ref. 1702/1
N. X Bracket Ref. 1202/955
or
Artico model
N. X Video door phone Ref. 1705/1
N. X Bracket Ref. 1705/955
VIDEO OUTDOOR STATION REFERENCES
TC
Sinthesi model
N. 2 Module with camera and door unit Ref. 1745/20-/21-/22
N. X Button modules Ref. 1145/11-/12-/13-/14
N. X/4 Conversation privacy device Ref. 1145/74
The panels must be installed in fl ush-mounting boxes with
module holder frames or in cases with hood for wall-mounted
versions. Refer to “Sinthesi panel” section of Doorphone and
Videodoorphone system - product technical manual.
or
K-Steel model
N. 2 Module camera Ref. 1755/30A
N. 2 Module with door unit Ref. 1155/30-/31-/32A
N. X Button modules Ref. 1155/11-/12A-/13A-/14A
N. X/4 Conversation privacy device Ref. 1145/74
The panels must be installed in fl ush-mounting boxes with
module holder frames or in cases with hood for wall-mounted
versions. Refer to “K-Steel modular vandal-proof panel” section
of Doorphone and Videodoorphone system - product technical
manual.
POWER SUPPLY REFERENCES
N. 1 Video power supply Ref. 789/5B
N. 1 Transformer Ref. 9000/230
N. 1 Relay box Ref. 788/51
N. X Video distributor Ref. 955/40
DIAGRAM NOTES
(see section 1)
C4.007 C4.008 C4.016 C4.018 CU.009 V5.001
VD.002 VX.006 VX.008 VX.014
VX.021
Cut or remove the jumpers on the device(s):
a) PS - G/T
b) 4 - F
2 14+n
4+n
4+n
5
5
5
5
213+n
TC TC
VIDEO
DISTRIBUTOR
VIDEO
DISTRIBUTOR
2 x 82Ω 1/4W
5
5
5
5
CONNECTION OF SEVERAL VIDEO DOOR PHONE TO 2 VIDEO OUTDOOR STATION
Automatic switching during calls (Mod. Sinthesi or Mod. K-Steel)
Comentarios a estos manuales